testing your imrs

testing your imrs

how do you know if your PEMF Mat is working?

Some sensitive individuals will be able to feel their iMRS mat, pillow, and probe working. Others will only be able to tell their iMRS is working by judging the long-term effects they experience in their health. If you fall into the second group, there is a simple way to test your iMRS system.

A Gauss Meter (sometimes called EMF meter) is a simple electronic device that is designed to alert you to the presence of EMF fields. You turn it on. Then, turn on your iMRS and it will show you the PEMF in action. They are inexpensive. Check Amazon with the button on the right.

Any gaussmeter will work as long as it will measure the intensities and frequencies the iMRS produces. Make sure the unit you buy can measure:

  • intensity range 0.09 – 300 micro Tesla
  • frequency range 3 – 15 Hz

Why It’s Important

Any electronic device can break from time to time. It happens. A gauss meter is the best way to ensure that your PEMF system is operating correctly.

The CellSensor

Any gaussmeter will work, but we have tested the CellSensor and think it is one of the best both because of its low price and because its flashing lights make it obvious when the iMRS is turned on and working.

It’s incredibly easy to use:

  • Take it out of the box.
  • Install a common 9-volt battery.
  • Plug the cable for the sensor into the side of the meter as shown.
  • Set the meter to the most sensitive setting (1-5 gauss).
  • Press the white button on the front of the meter to turn it on. It will flash to let you know it’s working.
  • Put the sensor (shown at the bottom of the photo) on top of the mat or pillow, or next to the probe. You may need to move it around a bit to get the best results.
  • Turn on the iMRS. Set it to the highest intensity setting and set the organ clock for morning (other settings will work, but these work the best).
  • The meter will start flashing.

That’s it!

CellSensor

Gauss (EMF) Meter

Buy It At Amazon

The APP method

If you have a smartphone, you can download an app that can show you your iMRS is working. They are typically called Magnetic Field Detector or Gauss Meter.

Be sure that the one you download can detect and display fields in the 1 microTesla range. 

Frankly, these apps are not terrific, but they will show something happens if you put your phone on the mat or pillow and turn your iMRS on to the highest setting.

A note of caution about both these apps and the compass method discussed below.

Because the results on the app or compass may appear small, it is easy to think that the EMF coming off the mat or pillow is not strong enough to get the job done. Nothing could be farther from the truth

The only purpose of the app or compass is to clearly show that EMF happens when you turn your iMRS on. Don’t draw any other conclusions.

The compass method

Don’t want to spend $20 for a gauss meter? There is another way to test your mat with an ordinary compass.

It’s not as reliable as the gauss meter, but it will work if you have a reasonable quality compass (not something out of a box of Cracker Jax).

This works for the iMRS Mat and Pillow. It’s not as easy to see for the Probe.

Put the compass on the iMRS Pillow or on the foot section of the iMRS mat. Take note of where the compass needle is pointing.

Then, set your iMRS controller to the highest intensity and turn it on.

You should see the needle move in response to the Pulsed ElectroMagnetic Field. You may need to move the compass around a bit to get the best results.

Testing the pemf in your body

Some people are concerned that the PEMF signal may not be reaching all parts of their body. If you have a gauss meter, it’s easy to discover the facts.

You will need a gauss meter. The compass and app techniques may not produce good results for lower intensity settings. Even less expensive gauss meters may not register the PEMF through some areas of the body.

To do the test. Turn on the iMRS and turn on the gauss meter. Lie on the mat or use the pillow/pad or probe as you would normally. Then, put the gauss meter on the area of the body you want to test. That’s it!

A gauss meter that has an audible tone works best for this because it may be difficult to see readings on a meter. The meter suggested above will work well but may be false negatives for the lowest iMRS intensity setting.

imrshealth healthcare professional

To Discover More, Pricing Information, Or To Order Your iMRS...

Call Us Now At (877) 278-1187

Be sure you talk to an iMRShealth healthcare professional product specialists. We're ready to help you.

Call Or Order Now